坡莫合金1J21
1J21对应的国际牌号:
Trademark |
GB |
ASTM |
UNS |
W.Nr |
1J21 |
化学成分:
Grade |
化学成分(%) |
|||||||||
C |
P |
S |
Mn |
Si |
Ni |
Cu |
V |
Co |
Fe |
|
Max |
||||||||||
1J21 |
0.04 |
0.02 |
0.02 |
0.03 |
0.03 |
0.5 |
0.20 |
0.80~1.20 |
49.0~51.0 |
余量 |
特点如下:
1J21 钴基软磁全金,饱和磁感应强度可以达到2.35T。它具有居里温度高(980℃)和磁致伸缩系数大(60*10-6)等特点。
加工条件及应用:
1J21适用于体积小,重量轻,功率大航天,航空电机,电磁铁极靴电源变压器、电压和助听器的震动膜片、磁致伸缩换能器和蜂鸣器元件。
各类合金相似牌号 | |||
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B、2E |
Plate | Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B、2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle、Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.6mm-4.0mm | |||
Welding rodΦ1.2mm-4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |