坡莫合金1J33
\
1J33对应的国际牌号：
|
Trademark |
GB |
ASTM |
UNS |
W.Nr |
|
1J33 |
化学成分：
|
Grade |
化学成分(%) |
||||||||
|
C |
P |
S |
Mn |
Si |
Ni |
Al |
Cr |
Fe |
|
| Max | |||||||||
|
1J33 |
0.05 |
0.020 |
0.020 |
0.30~0.60 |
0.30~0.60 |
32.8~33.8 |
- |
余量 |
|
特点如下：
1J33 是含镍30%～40%的铁镍合金、居里温度在25～160℃之间，在居里温度以下磁感应强度随温度升高而剧烈下降，用来补偿磁路中由温度引起的磁性变化。
加工条件及应用：
适用于行波管、磁控管、电压调节器、里程表、风向风速仪和电度表中的磁分路补偿元件。
| 各类合金相似牌号 | |||
| Form | Specification | Supply Form | Others |
| Sheet | Thickness：0.40-4.75mm，General Width：1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed，Surface 2B、2E |
| Plate | Thickness：4.76-60mm，Width：1500、2000、2500mm，Length：3000、6000、8000、8500mm（Under 10mm plate can be coiled） | Whole Coil or piece of it | Single hot rolling，Solid solution annealed state，Surface 1D |
| Belt | Thickness：0.10-3.0mm，Width：50-500mm | Whole Coil or Specified size | Cold Annealed，Surface 2B、2E |
| Bar & Rod | Rolled barΦ5-45mm，Length≤1500mm | Polished Bar（circle、Square） | Solution annealing,descaling |
| Forged barΦ26-245mm，Length≤4000mm | |||
| Weld tube | Outer diameterΦ4.76-135mm，Wall Thickness0.25-4.00mm，Length：≤35000 mm | Base on your requirement | |
| Seamless Tube | Outer diameterΦ3-114mm，Wall Thickness0.2-4.5mm | Base on your requirement | |
| Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
| Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
| Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
| Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin：America, Sweden, Britain, Germany, Austria, Italy, France. |
| Straight WireΦ1.6mm-4.0mm | |||
| Welding rodΦ1.2mm-4.0mm | |||
| Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
| Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
