坡莫合金Alloy 42/UNS K94100/4J42
Alloy42对应的国际牌号
Trademark |
GB |
AISI/ASTM |
UNS |
W.Nr |
BS |
AFNOR |
IMPHY |
VAC |
Telcan |
USA Magnetics |
Japan |
Alloy 42 |
4J42 |
USA(ASTM)Glass sealing 42 / Uniseal 42 |
UNS K94100 |
WS 1.3917 |
Ni42 |
Germany: Vacodil 42 / Nilo 42 |
Dumet42 / DIN 17745 AFNOR NF A54-301 |
Vacodil 42 |
Nilo 42 |
Glass sealing 42 |
D |
化学成分
Grade |
C% |
P% |
S% |
Mn% |
Si% |
Al% |
Co% |
Ni% |
Fe% |
Alloy 42 |
Max 0.05 |
Max 0.020 |
Max 0.020 |
Max 0.80 |
Max 0.30 |
Max 0.10 |
Max 1.0 |
41.0-42.5 |
Bal. |
物理性能
Grade |
抗拉强度 N/mm² |
|
Soft |
Hard |
|
Alloy 42 Strip |
<590 |
>700 |
特点如下:
Alloy 42含有41%镍的镍铁控制膨胀合金。它具有从室温到大约300℃的低且名义上恒定的热膨胀系数。
加工条件及应用:
用于封装在玻璃外壳中的组件(如灯和电子管)的玻璃到金属的密封。
各类合金相似牌号 | |||
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B、2E |
Plate | Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B、2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle、Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.6mm-4.0mm | |||
Welding rodΦ1.2mm-4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |