Cobalt Alloy Waspaloy Alloy UNS N07001
相似牌号:W.NR 2.4654; UNS N07001; GH4738
合金介绍:
是Ni-Cr-Co基沉淀硬化型变形高温合金,使用温度在815℃以下。合金加入钴、铬、和钼元素进行固溶强化,加入铝、钛元素形成γ’沉淀强化相,加入硼、锆元素净化和强化晶界。合金在760~870℃具有较高的屈服强度和抗疲劳性能,在870℃以下的燃气涡轮气氛中具有较好的抗氧化和抗腐蚀性能,加工塑性良好、组织性能稳定。
化学成分:
Alloy |
% |
Ni |
Cu |
Al |
Zr |
B |
Cr |
Mo |
Fe |
Co |
C |
Mn |
Si |
Ti |
P |
S |
Waspaloy |
Min. |
Balance |
1.20 |
0.02 |
0.003 |
18.00 |
3.5 |
12.0 |
0.02 |
2.75 |
||||||
Max. |
0.5 |
1.60 |
0.12 |
0.01 |
21.00 |
5.0 |
2.0 |
15.0 |
0.1 |
1.0 |
0.75 |
3.25 |
0.03 |
0.03 |
物理性能:
密度:ρ=8.19g/cm3
熔点:1330℃-1360 ℃
应用领域:
应用于汽轮机发动机零部件等等。
各类合金的常用规格 | |||
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B、2E |
Plate | Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B、2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle、Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.6mm-4.0mm | |||
Welding rodΦ1.2mm-4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |