Cobalt Alloy Alloy L605 Haynes 25 UNS R30605
\
HY Haynes 25相似牌号：UNS R30605; Udimet alloy L605;Alloy L605;Cobalt alloy L605; Haynes 25;
合金介绍：
此合金是一种固溶强化钴 – 铬 – 钨合金，具有优良的高温强度和优良的抗氧化性，2000°F（1093℃）。 该合金还具有良好的耐硫化性和耐磨损和耐磨性。
化学成分：
|
Alloy |
% |
Cr |
Ni |
Co |
W |
C |
Fe |
Mn |
Si |
P |
S |
|
605 |
MIN |
19.0 |
9.0 |
- |
14.0 |
0.05 |
- |
1.0 |
- |
- |
- |
|
MAX |
21.0 |
11.0 |
Balance |
16.0 |
0.15 |
3.0 |
2.0 |
0.4 |
0.04 |
0.03 |
物理性能：
密度：ρ=9.27g/cm3
熔点：1330℃-1410 ℃
在常温下合金的机械性能的最小值:
|
Alloy Status |
Tensile strength |
Yield strength RP0.2 N/mm² |
Elongation |
|
Solution Treatment |
980 |
460 |
50 |
应用领域：
1.汽轮机的叶片
2. 工业炉、马弗炉（高温炉窑）
3. 飞机的高温构件、汽轮机发动机、轴承、弹簧的零部件
| 各类合金相似牌号 | |||
| Form | Specification | Supply Form | Others |
| Sheet | Thickness：0.40-4.75mm，General Width：1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed，Surface 2B、2E |
| Plate | Thickness：4.76-60mm，Width：1500、2000、2500mm，Length：3000、6000、8000、8500mm（Under 10mm plate can be coiled） | Whole Coil or piece of it | Single hot rolling，Solid solution annealed state，Surface 1D |
| Belt | Thickness：0.10-3.0mm，Width：50-500mm | Whole Coil or Specified size | Cold Annealed，Surface 2B、2E |
| Bar & Rod | Rolled barΦ5-45mm，Length≤1500mm | Polished Bar（circle、Square） | Solution annealing,descaling |
| Forged barΦ26-245mm，Length≤4000mm | |||
| Weld tube | Outer diameterΦ4.76-135mm，Wall Thickness0.25-4.00mm，Length：≤35000 mm | Base on your requirement | |
| Seamless Tube | Outer diameterΦ3-114mm，Wall Thickness0.2-4.5mm | Base on your requirement | |
| Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
| Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
| Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
| Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin：America, Sweden, Britain, Germany, Austria, Italy, France. |
| Straight WireΦ1.6mm-4.0mm | |||
| Welding rodΦ1.2mm-4.0mm | |||
| Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
| Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |