Nimonic PE16/BS HR55/AFNOR NW 11AC/BS HR207
Nimonic PE16对应的国际牌号
Trademark |
BS |
AFNOR |
UNS |
W.Nr |
Nimonic PE16 |
BS HR55 BS HR207 |
AFNOR NW 11AC |
化学成分:
Ni + Co |
Cr |
Mo |
Fe |
Al |
Ti |
C |
42-45 |
15.5-17.5 |
2.8-3.8 |
Rem |
1.1-1.3 |
1.1-1.3 |
0.04-0.08 |
Cu |
Si |
Mn |
Co |
B |
Zr |
S |
0.5 max |
0.5 max |
0.2 max |
2.0 max |
0.005 max |
0.02-0.04 |
0.015 max |
性能如下:
为了固溶强化而添加有钼的析出硬化型镍铁铬合金,在温度达到约1380°F(750°C)时具有良好的强度和抗氧化性。该合金被设计成提供具有优异的热加工,冷加工和焊接特性的沉淀硬化材料。
加工条件及用途:
用于燃气轮机部件和核反应堆。
各类合金相似牌号 | |||
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B、2E |
Plate | Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B、2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle、Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.6mm-4.0mm | |||
Welding rodΦ1.2mm-4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |