坡莫合金1J46
1J46 对应的国际牌号:
Trademark |
IMPHY |
VAC |
Telcan |
USA Magnetics |
USA Carpenter |
Japan |
1J46 |
Anhyster DS/Superanhyster 50/ |
Permenorm 5000 H2/Permenorm 5050 H2 |
Radiometal R4550/Radiometal SR |
Alloy 48SL Alloy 48Rotor |
High Permability 45 High Permability 49 |
PB-1 PB-2 |
化学成分:
Grade |
化学成分(%) |
|||||||||
C |
P |
S |
Mn |
Si |
Ni |
Cr |
Mo |
Cu |
Fe |
|
Max |
||||||||||
1J46 |
0.03 |
0.020 |
0.020 |
0.60~1.00 |
0.15~0.30 |
45.0~47.0 |
|
|
≤0.20 |
余量 |
特点如下:
1J46是含镍50%左右的铁镍软磁合金,具有较高的磁导率,较高的磁感应强度和低的矫顽力。
加工条件及应用:
1J46适用于中小学功率变压器、微电机转子、继电器、电磁离合器、力矩马达街铁、阻流畔圈磁屏蔽、电子表步进电机线架、电子钟定子、蜂鸣器震动片和电话机元件。
各类合金相似牌号 | |||
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B、2E |
Plate | Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B、2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle、Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.6mm-4.0mm | |||
Welding rodΦ1.2mm-4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |