Stellite 25/UNS R30605
\
Stellite 25对应的国际牌号：
|
Trademark |
GB |
ASTM |
UNS |
W.Nr |
|
Stellite 25 |
UNS R30605 |
化学成分：
|
Co |
Cr |
W |
C |
Ni |
Mo |
Fe |
Si |
Other |
|
Bal. |
20 |
14 |
0.1 |
10 |
<1.0 |
<3.0 |
<1.0 |
<0.5 |
机械性能：
|
ASME/AWS |
Hardness(HRC) |
|
- |
20-45 |
特点如下：
Stellite®合金25抗氧化和渗碳至1900°F，该合金在环境温度下可以耐受潮湿的氯气，并且在一定条件下耐硝酸和盐酸，建议使用曝光测试来验证性能。
加工条件和应用：
对需要磨损，热疲劳和耐热腐蚀性能的金属加工的工具，例如穿孔点，成型工具和挤压模具,也用于炉子硬件。
| 各类合金相似牌号 | |||
| Form | Specification | Supply Form | Others |
| Sheet | Thickness：0.40-4.75mm，General Width：1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed，Surface 2B、2E |
| Plate | Thickness：4.76-60mm，Width：1500、2000、2500mm，Length：3000、6000、8000、8500mm（Under 10mm plate can be coiled） | Whole Coil or piece of it | Single hot rolling，Solid solution annealed state，Surface 1D |
| Belt | Thickness：0.10-3.0mm，Width：50-500mm | Whole Coil or Specified size | Cold Annealed，Surface 2B、2E |
| Bar & Rod | Rolled barΦ5-45mm，Length≤1500mm | Polished Bar（circle、Square） | Solution annealing,descaling |
| Forged barΦ26-245mm，Length≤4000mm | |||
| Weld tube | Outer diameterΦ4.76-135mm，Wall Thickness0.25-4.00mm，Length：≤35000 mm | Base on your requirement | |
| Seamless Tube | Outer diameterΦ3-114mm，Wall Thickness0.2-4.5mm | Base on your requirement | |
| Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
| Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
| Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
| Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin：America, Sweden, Britain, Germany, Austria, Italy, France. |
| Straight WireΦ1.6mm-4.0mm | |||
| Welding rodΦ1.2mm-4.0mm | |||
| Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
| Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
