Nickel Alloy Inconel 725 UNS N07725
HY 725 相似牌号
Trademark Inconel 725 / UNS N07725
HY 725的化学成分:
合金 |
% |
镍 |
铬 |
钼 |
铝 |
钛 |
铁 |
铌 |
HY 725 |
最小 |
55 |
19 |
7 |
1 |
余 量 |
2.75 |
|
最大 |
59 |
22.5 |
9.5 |
0.35 |
1.7 |
4 |
HY 725合金具有以下特性:
该合金为镍铬钼铌合金,具有优良的耐腐蚀性能,经时效热处理后可以极大的增加合金强度,能极大地提高合金的延展性和抗拉性。该合金还具有较强的抗应力腐蚀性能。
HY 725的应用领域:
用于耐酸设备中的管件、接头、轴承。在海洋船舶设备上也有广泛应用。
生产标准:
棒材;丝材 |
ASTM B 805 /ASME Code Case 2217 |
各类合金的常用规格 | |||
Form | Specification | Supply Form | Others |
Sheet | Thickness:0.40-4.75mm,General Width:1000、1219、1500mm | Whole Coil or piece of it | Cold Annealed,Surface 2B、2E |
Plate | Thickness:4.76-60mm,Width:1500、2000、2500mm,Length:3000、6000、8000、8500mm(Under 10mm plate can be coiled) | Whole Coil or piece of it | Single hot rolling,Solid solution annealed state,Surface 1D |
Belt | Thickness:0.10-3.0mm,Width:50-500mm | Whole Coil or Specified size | Cold Annealed,Surface 2B、2E |
Bar & Rod | Rolled barΦ5-45mm,Length≤1500mm | Polished Bar(circle、Square) | Solution annealing,descaling |
Forged barΦ26-245mm,Length≤4000mm | |||
Weld tube | Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm | Base on your requirement | |
Seamless Tube | Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm | Base on your requirement | |
Wire | Outer diameterΦ0.1-13mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Forged piece | discs,rings,squares,blocks,slabs | Base on your requirement | Steel, Alloy |
Flangs | All kinds of Flangs | Base on your requirement | Steel, Alloy |
Welding Material | Coil wire Φ0.025mm-1.6mm | Base on your requirement | Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
Straight WireΦ1.6mm-4.0mm | |||
Welding rodΦ1.2mm-4.0mm | |||
Tube | Elbow, three links, four links, different diameter size | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |
Explosive bonded laminate | Raw Sheet Thickness≥2mm | Base on your requirement | Ni & Ni alloy, Ti & Ti alloy |